Notice: Product Images may differ from the actual product. Image may be a representation of this item.
Yamaha YZ125 Wiseco Piston Kit – 54.00 mm Bore
Your Price: $193.19
SKU: RE931M05400
Estimated Shipped Date 3-4 Weeks
–
Wiseco 2 Stroke Racer Elite Piston Kit, 54.00 mm Bore
Wiseco’s Racer Elite series forged 2-stroke pistons deliver industry-first 2-stroke piston design and technology to perform in even the most serious racing conditions. These are the first 2-stroke pistons to be forged from 2000 series alloy, providing even greater tensile strength. ArmorPlating surface treatment on the crown, in the ring groove(s), and in the pin bores protects from harmful operating conditions, while Wiseco’s proprietary ArmorFit skirt coating conforms to the cylinder bore for optimized fitment and performance. For the serious 2-stroke rider and racer, Racer Elite is the only choice.
- Designed for full-race 2-stroke applications
- Engineered, forged, and machined in the USA in Mentor, OH
- First 2-stroke piston to be forged with 2000-series alloy, providing greater tensile strength
- ArmorPlating surface treatment on crown, in ring groove and pin bores protext from harmful detonation, friction wear, and ring micro-welding
- ArmorFit skirt coating conforms to the cylinder bore for optimized fitment, translating to optimized performance
- High-quality ring(s), wrist pin(s), and circlips included
GTIN: 00193564445834
Product Series | 2 Stroke Racer Elite Series |
---|---|
Included Components | Ring Set #2126CS, Wrist Pin #S668, CirClip #CW15 |
Bore Diameter | 54.00 MM |
Piston Diameter | 53.92 MM |
Piston Material | 2618 |
Piston Oversize | STD |
Years
Makes
Models
Instructions: Enter a value in the un-shaded boxes below as they pertain to your engine.
Note: For pistons BELOW the block @ TDC – value in box must be a POSITIVE number (.000)
Note: For pistons ABOVE the block @ TDC – value in box must be a NEGATIVE number (-.000)
Note: For a DISH piston – value in box must be a POSITIVE number (0.0)
Note: For a DOME piston – value in box must be a NEGATIVE number (-0.0)
Note: Manipulate the DOME/DISH & PISTON to DECK volumes to get the ratio you want.