Yamaha YZ450F Complete Engine Rebuild Kit – 77.00MM
Your Price: $926.99
SKU: PWR216-100
Estimated Shipped Date 3-4 Weeks
–
Garage Buddy Complete Engine Rebuild Kit, 77.00 MM Bore
Born over 80 years ago from the passion for racing, Wiseco is a world leader in manufacturing high-performance, forged pistons for the motorcycle, automotive, ATV, snowmobile, personal watercraft, and outboard marine markets. The Wiseco crew shares the same level of dedication to motorsports as their customers and are focused on continually refining the quality and practices it takes to exceed expectations. Engineered, forged, and machined on cutting-edge equipment in the U.S. at Wiseco’s Mentor, Ohio manufacturing facility, Wiseco pistons are the undisputed leader in quality and performance. Wiseco Performance Products, built for racers, by racers.
- Precision-machined rotating and reciprocating rebuild kit – includes all top and bottom-end components for a complete engine rebuild!
- Free Wiseco hour meter and bracket included to track maintenance intervals
- Complete crankshaft with precision machined crank webs for ultimate strength and durability and copper-plated, heat-treated, shot-peened connecting to remove residual stress and smooth surface blends
- Quality forged piston kit includes rings, wrist pin, and circlips
- Also includes complete top and bottom end gasket kits
- Covered under 90-day/10-hour limited warranty
GTIN: 00193564427335
| Product Series | Garage Buddy Engine Rebuild Kits |
|---|---|
| Included Components | Crankshaft Assy, Piston #40116M07700, Top End Gasket #W6929, Bottom End Gasket #WB1184, Hour Meter w/ Mount #W8063/W8062, Maxima Assembly Lube |
| Bore Diameter | 77.00 MM |
| Compression Ratio Actual | 13.5:1 |
| Piston Material | 2618 |
Years
Makes
Models
Instructions: Enter a value in the un-shaded boxes below as they pertain to your engine.
Note: For pistons BELOW the block @ TDC – value in box must be a POSITIVE number (.000)
Note: For pistons ABOVE the block @ TDC – value in box must be a NEGATIVE number (-.000)
Note: For a DISH piston – value in box must be a POSITIVE number (0.0)
Note: For a DOME piston – value in box must be a NEGATIVE number (-0.0)
Note: Manipulate the DOME/DISH & PISTON to DECK volumes to get the ratio you want.