Notice: Product Images may differ from the actual product. Image may be a representation of this item.
Kawasaki KX250F Complete Engine Rebuild Kit – 77mm
Your Price: $753.57
SKU: PWR169-100
Estimated Shipped Date 3-4 Weeks
–
Wiseco, Garage Buddy Complete Engine Rebuild Kit, 77.00 mm Bore, 13.5:1 CR
Wiseco’s Garage Buddy Complete Engine Rebuild Kits helps save time and money, whether you are working on a dirt bike, UTV or ATV. Available for a wide variety of popular powersports applications, the Complete Engine Rebuild Kits help make powersports engine maintenance hassle-free. The kit includes – A complete crankshaft assembly and OEM-quality main bearings, all necessary gaskets, seals, and O-rings, Wiseco forged piston kit(s) including necessary piston components, Small-end bearing (for two-stroke motorcycle applications), and an hour meter and assembly lube. Covered under 90-day/10-hour warranty against manufacturer defects, the Complete Engine Rebuild Kits give you everything you need for a quick and efficient rebuild.
- Precision-machined rotating and reciprocating rebuild kit – includes all top and bottom-end components for a complete engine rebuild!
- Free Wiseco hour meter and bracket included to track maintenance intervals
- Complete crankshaft with precision machined crank webs for ultimate strength and durability and copper-plated, heat-treated, shot-peened connecting to remove residual stress and smooth surface blends
- Quality forged piston kit includes rings, wrist pin, and circlips
- Also includes complete top and bottom end gasket kits
- Covered under 90-day/10-hour limited warranty
GTIN: 00193564022752
Product Series | Garage Buddy Engine Rebuild Kits |
---|---|
Included Components | Crankshaft Assy, Piston #4920M07700, Top End Gasket #W6661, Bottom End Gasket #WB1175, Main Bearing #B5041, Cam Chain #CC007, Hour Meter w/ Mount #W8063/W8062, Maxima Assembly Lube |
Bore Diameter | 77.00 MM |
Piston Diameter | 76.96 MM |
Compression Ratio Actual | 13.5:1 |
Piston Material | 2618 |
Piston Oversize | STD |
Years
Makes
Models
Instructions: Enter a value in the un-shaded boxes below as they pertain to your engine.
Note: For pistons BELOW the block @ TDC – value in box must be a POSITIVE number (.000)
Note: For pistons ABOVE the block @ TDC – value in box must be a NEGATIVE number (-.000)
Note: For a DISH piston – value in box must be a POSITIVE number (0.0)
Note: For a DOME piston – value in box must be a NEGATIVE number (-0.0)
Note: Manipulate the DOME/DISH & PISTON to DECK volumes to get the ratio you want.