fbpx

Free Shipping On Orders Over $250 No Code Needed!!

Notice: Product Images may differ from the actual product. Image may be a representation of this item.

Wiseco Clutch Basket – 85SX/105SX


Your Price: $231.74

SKU: WPP3045

Estimated Shipped Date 3-4 Weeks

Wiseco, Clutch Basket, 85SX ’03-17,105SX ’04-11

Wiseco clutch baskets are engineered, forged, and machined in-house in its USA manufacturing facility. Thanks to the increased tensile strength of the forged material over billet and a hard anodize and Teflon coating treatment, Wiseco clutch baskets are covered under a lifetime warranty against notching and breaking! With Wiseco, you can have a Clutch for Life.

  • Engineered, forged, and machined in-house in the USA
  • Forged material provides greater tensile strength over popular billet options
  • Hard-anodized and teflon coated for improved wear resistance and clutch modulation
  • Includes cushions, backing plate, and hardware needed for installation
  • Covered under lifetime warranty against notching and breaking

GTIN: 00193564109118

Product Series

Clutch

Years

2017
2016
2015
2014
2013
2012
Show All

Makes

Husqvarna
KTM

Models

TC 85
TC85 17/14
105 SX
85 SX (17/14)
85 SX (19/16)
85 SX 17/14
Show All
Instructions: Enter a value in the un-shaded boxes below as they pertain to your engine.
Note: For pistons BELOW the block @ TDC – value in box must be a POSITIVE number (.000)
Note: For pistons ABOVE the block @ TDC – value in box must be a NEGATIVE number (-.000)
Note: For a DISH piston – value in box must be a POSITIVE number (0.0)
Note: For a DOME piston – value in box must be a NEGATIVE number (-0.0)
Note: Manipulate the DOME/DISH & PISTON to DECK volumes to get the ratio you want.
Enter the number of cylinders of your engine
Bore
Finished bore of your engine
Stroke
Stroke of your engines crankshaft
Rod Length
Ctr. to Ctr. length of your connecting rods
Gasket Bore
Head Gasket bore diameter
Comp. Gasket
Compressed Head Gasket thickness
Block Deck Height
Center of main bearing bore to top of block
Top Ring Down
Top of 1st ring to top of pistons(FLAT)
Chamber Volume
Cylinder Head chamber volume in CC’s
Dome/Dish Volume
DOME (-) or DISH (+) vol. (theoretical) in CC’s
Piston to Deck
Top of BLOCK to top of piston (FLAT) @ TDC
Click “Calculate” for dimension results.
Total Volume
 
Cylinder Volume
Total cylinder volume in CC’s =
Clearance Volume
All effective vol. above block deck @ TDC in CC’s =
Gasket Volume
Volume of your head gasket in CC’s =
Top Ring Volume
Total volume above the top ring @ TDC in CC’s =
Deck Volume
Volume of area above the pistons @ TDC in CC’s =
Piston Top Land
Piston top land diameter for volume calculations =
1/2 Stroke
1/2 stroke of your engine’s crankshaft in inches =
Compression Ht.
Ctr. of piston pin to top of piston (FLAT) in inches =
Cubic Inches
Cubic inch displacement of your engine =
For the given dimensions, your compression ratio