Notice: Product Images may differ from the actual product. Image may be a representation of this item.
RED Series Piston Chevrolet Big Block – 4.600 in. Bore – 1.120 in. CH, 3.00 CC
Your Price: $141.74
SKU: 70100X100
In Stock
–
Wiseco Chevrolet Big Block Piston, 4.600 in. Bore, 1.120 in. Compression Height, 0.990 in. Pin Diameter, RED Series, Set of 1.
Appropriately dubbed the RED™ series, these forged pistons utilize Race Engineered Design™ to offer the strength and durability performance engines need with precision-machined features to provide a competitive edge. RED™ series piston kits are available for range of popular, domestic V8 platforms, the cornerstone of racing and performance from drag racing to circle track.
- Engineered, forged, and machined in the USA from 2618 aluminum for tensile strength needed in performance racing and power adder applications
- Dedicated forgings allow for optimized, engine-specific strutted design to maximize strength-to-weight characteristics
- ArmorGlide® skirt coating reduces operating friction and noise while also reducing skirt and cylinder wear
- Horizontal slot oiling in pin bores maintain optimal wrist pin and small-end lubrication, critical for long service life
- Accumulator groove helps maintain consistent ring seal and power
- Each part number includes premium rings – no need for additional sourcing
GTIN:
| Product Series | RED Series |
|---|---|
| Bore Diameter | 4.600 IN |
| Stroke | 4.250 IN |
| Rod Length | 6.535 IN |
| Compression Height | 1.120 IN |
| Cylinder Head | Conventional Open Chamber |
| Piston Volume | 3.00 CC |
| Piston Material | 2618 |
| Skirt Coating | Yes |
| Forging Type | Strutted |
| Piston Quantity | 1 |
| Wrist Pin Quantity | 1 |
| Ring Set Included | Yes |
| Ring Set Part Number | J100U1-4600-5 |
| Top Compression Ring Thickness | 0.0625 IN |
| Top Ring Material | Ductile Iron |
| Second Compression Ring Thickness | 0.0625 IN |
| Second Ring Material | Iron |
| Oil Ring Thickness | 0.1875 IN |
| Oil Ring Tension | Ultra Low |
| Third Ring Material | Carbon Steel |
| Wrist Pin Included | Yes |
| Wrist Pin Part Number | S460 |
| Wrist Pin Material | 5115 |
| Wrist Pin Style | Floating |
| Wrist Pin Outer Diameter | 0.990 IN |
| Wrist Pin Retainer Included | Yes |
| Wrist Pin Retainer Part Number | CS25 |
| Wrist Pin Retainer Quantity | 4 |
Makes
Engines
Instructions: Enter a value in the un-shaded boxes below as they pertain to your engine.
Note: For pistons BELOW the block @ TDC – value in box must be a POSITIVE number (.000)
Note: For pistons ABOVE the block @ TDC – value in box must be a NEGATIVE number (-.000)
Note: For a DISH piston – value in box must be a POSITIVE number (0.0)
Note: For a DOME piston – value in box must be a NEGATIVE number (-0.0)
Note: Manipulate the DOME/DISH & PISTON to DECK volumes to get the ratio you want.