fbpx

Notice: Product Images may differ from the actual product. Image may be a representation of this item.

Husaberg/Husqvarna/KTM Wiseco Clutch Fiber Kit – 4 Alloy & 2 Steel

SKU: WPPA004

Wiseco, Clutch Plate Kit – 4 Alloy & 2 Steel

From forged clutch baskets, inner hubs, and pressure plates to OEM quality clutch plates and springs, Wiseco clutch components have been proven at every level of dirt bike and ATV competition. Available as individual components and complete kits, don’t let a worn-out clutch hold back your performance, freshen it up with Wiseco today.

  • Complete clutch solutions available from Wiseco
  • Forged clutch baskets, inner hubs, and pressure plates
  • OEM quality drive plates and friction plates
  • Clutch pack kits and performance clutch kits available

GTIN: 00193564108142

Product Series

Clutch

Instructions: Enter a value in the un-shaded boxes below as they pertain to your engine.
Note: For pistons BELOW the block @ TDC – value in box must be a POSITIVE number (.000)
Note: For pistons ABOVE the block @ TDC – value in box must be a NEGATIVE number (-.000)
Note: For a DISH piston – value in box must be a POSITIVE number (0.0)
Note: For a DOME piston – value in box must be a NEGATIVE number (-0.0)
Note: Manipulate the DOME/DISH & PISTON to DECK volumes to get the ratio you want.
Enter the number of cylinders of your engine
Bore
Finished bore of your engine
Stroke
Stroke of your engines crankshaft
Rod Length
Ctr. to Ctr. length of your connecting rods
Gasket Bore
Head Gasket bore diameter
Comp. Gasket
Compressed Head Gasket thickness
Block Deck Height
Center of main bearing bore to top of block
Top Ring Down
Top of 1st ring to top of pistons(FLAT)
Chamber Volume
Cylinder Head chamber volume in CC’s
Dome/Dish Volume
DOME (-) or DISH (+) vol. (theoretical) in CC’s
Piston to Deck
Top of BLOCK to top of piston (FLAT) @ TDC
Click “Calculate” for dimension results.
Total Volume
 
Cylinder Volume
Total cylinder volume in CC’s =
Clearance Volume
All effective vol. above block deck @ TDC in CC’s =
Gasket Volume
Volume of your head gasket in CC’s =
Top Ring Volume
Total volume above the top ring @ TDC in CC’s =
Deck Volume
Volume of area above the pistons @ TDC in CC’s =
Piston Top Land
Piston top land diameter for volume calculations =
1/2 Stroke
1/2 stroke of your engine’s crankshaft in inches =
Compression Ht.
Ctr. of piston pin to top of piston (FLAT) in inches =
Cubic Inches
Cubic inch displacement of your engine =
For the given dimensions, your compression ratio