fbpx
Sale!

Notice: Product Images may differ from the actual product. Image may be a representation of this item.

RED Series Chevy Small Block Piston Set – 4.135 in. Bore – 1.000 .in CH, -6.60 CC


Your Price: $818.99

SKU: RED0007X1

In Stock

–

Wiseco Chevrolet Small Block Piston Set , 4.135 in. Bore, 1.000 in. Compression Height, 0.927 in. Pin Diameter, RED Series, Set of 8.

Appropriately dubbed the RED™ series, these forged pistons utilize Race Engineered Design™ to offer the strength and durability performance engines need with precision-machined features to provide a competitive edge. RED™ series piston kits are available for range of popular, domestic V8 platforms, the cornerstone of racing and performance from drag racing to circle track.

  • Engineered, forged, and machined in the USA from 2618 aluminum for tensile strength needed in performance racing and power adder applications
  • Dedicated forgings allow for optimized, engine-specific strutted design to maximize strength-to-weight characteristics
  • ArmorGlide® skirt coating reduces operating friction and noise while also reducing skirt and cylinder wear
  • Horizontal slot oiling in pin bores maintain optimal wrist pin and small-end lubrication, critical for long service life
  • Accumulator groove helps maintain consistent ring seal and power
  • Each part number includes premium rings – no need for additional sourcing
Categories: , , , ,

GTIN: 00193564511768

Product Series

RED Series
Bore Diameter

4.135 IN
Stroke

4.000 IN
Rod Length

6.000 IN
Compression Height

1.000 IN
Piston Volume

-6.60 CC
Piston Material

2618
Skirt Coating

Yes
Forging Type

Strutted
Piston Quantity

8
Ring Set Included

Yes
Top Compression Ring Thickness

1.20 MM
Second Compression Ring Thickness

1.20 MM
Oil Ring Thickness

3.00 MM
Wrist Pin Material

5115
Wrist Pin Style

Floating
Wrist Pin Outer Diameter

0.927 IN
Instructions: Enter a value in the un-shaded boxes below as they pertain to your engine.
Note: For pistons BELOW the block @ TDC – value in box must be a POSITIVE number (.000)
Note: For pistons ABOVE the block @ TDC – value in box must be a NEGATIVE number (-.000)
Note: For a DISH piston – value in box must be a POSITIVE number (0.0)
Note: For a DOME piston – value in box must be a NEGATIVE number (-0.0)
Note: Manipulate the DOME/DISH & PISTON to DECK volumes to get the ratio you want.
Enter the number of cylinders of your engine
Bore
Finished bore of your engine
Stroke
Stroke of your engines crankshaft
Rod Length
Ctr. to Ctr. length of your connecting rods
Gasket Bore
Head Gasket bore diameter
Comp. Gasket
Compressed Head Gasket thickness
Block Deck Height
Center of main bearing bore to top of block
Top Ring Down
Top of 1st ring to top of pistons(FLAT)
Chamber Volume
Cylinder Head chamber volume in CC’s
Dome/Dish Volume
DOME (-) or DISH (+) vol. (theoretical) in CC’s
Piston to Deck
Top of BLOCK to top of piston (FLAT) @ TDC
Click “Calculate” for dimension results.
Total Volume
 
Cylinder Volume
Total cylinder volume in CC’s =
Clearance Volume
All effective vol. above block deck @ TDC in CC’s =
Gasket Volume
Volume of your head gasket in CC’s =
Top Ring Volume
Total volume above the top ring @ TDC in CC’s =
Deck Volume
Volume of area above the pistons @ TDC in CC’s =
Piston Top Land
Piston top land diameter for volume calculations =
1/2 Stroke
1/2 stroke of your engine’s crankshaft in inches =
Compression Ht.
Ctr. of piston pin to top of piston (FLAT) in inches =
Cubic Inches
Cubic inch displacement of your engine =
For the given dimensions, your compression ratio